OIL PUMPS

- Performance and Heavy duty-

Performance and Heavy duty applications require an increase in both volume and pressure. Increased bearing loads, RPM and horsepower all place a greater demand on the oil system which, if not up to the job, will cause severe engine failure. Here's why the Milodon Small Block Chevy oil pump is better.

• 40,000 PSI "G-10" housing material

- This material is normally used for brake rotors.very tough.

• Neck is stronger, to end the pump body breaking off during extreme use

- Bolt flange pad has an improved machined radius to avoid cracks.

- Neck is thicker in key areas.

• Superior performance at low and high RPM

• Only 1/2 ounce heavier than other pumps

• CNC machined for precise tolerances

• Every pump is 100% flow tested

• Suitable for all applications, Pro Street to 7 second Drag Cars or Circle Track


- Small Block Chevy-


- Big Block Chevy-

• 40,000 PSI "G-2" housing material

- This material is normally used for brake rotors.very tough

• Neck is redesigned, to end the pump body breaking off during extreme use

- Bolt flange pad area is closed in for absolute support

- Neck is much thicker

• Suitable for all applications, Pro Street to 7 second drag cars and marine

High Volume, High Pressure

While some parts are cast overseas, all parts are designed, fitted, assembled and tested here in the USA

Big Block - Mk IV, Mk V and Gen VI 18760 Buy Milodon Performance Water Pumps

 

 


BILLET ALUMINUM OIL PUMP

- For extreme use in all types of racing from drag race to Pro-Street.

- CNC machined from billet 6061 aircraft aluminum, this pump is the ultimate in strength and performance

- Neck is 60% thicker than stock and most other billet pumps to avoid breaking off

- Adjustable pressure from less than stock if desired to high pressure.

- Roller bearing gear shaft support in the cover to prevent gear deflection and premature housing wear

- 4130 chrome moly gear shafts resist wear and failure.

- Presicion formed gears ensure perfect mesh for best roll resistance and pressure output efficiency. Can withstand extreme race engine RPM.

- Oil pressure bypass returns oil inside the oil pump which will not aerate and add heat to the oil supply

- Oil passages in and out of the pump increased for improved flow & volume

- Pickup is a part of the billet oil pump bottom cover so there is no breakage, falling out or sucking air.

- Big Block Chevy - MK IV, V, GEN VI-

 
Oil Pump Housing & Gear Assy (Pickup Plate Required) 18910 Buy Milodon Performance Water Pumps
Pickup Plate for 7 3/4" tapered pans or 7 1/2" flat pans 18930 Buy Milodon Performance Water Pumps
Pickup Plate for 8" deep pans 18931 Buy Milodon Performance Water Pumps
Pickup Plate for 8 1/4" deep pans 18932 Buy Milodon Performance Water Pumps
Pickup Plate for 8 1/2" deep pans 18933 Buy Milodon Performance Water Pumps
Pickup Plate for 9 1/2" deep pans 18934 Buy Milodon Performance Water Pumps

 


OIL PUMP ASSEMBLIES

- Small Block Chevy

 

Street / Strip or Drag Race
- High volume / high pressure pump for 8 1/4 inch deep pans such as 30900-30909, 31167-31169, 31065 and

30401 18704 Buy Milodon Performance Water Pumps

 

Stock Use
-High volume / high pressure pump for 7 1/2 inch deep stock pans such as 30700, 30701, 30702 and 31501, 31502,

31503 18706 Buy Milodon Performance Water Pumps

 

Street / Strip
-High volume / high pressure pump for 7 1/2inch deep pans such as 31501,

31502, 31503 18707 Buy Milodon Performance Water Pumps

 

- Big Block Chevy -


CHRYSLER OIL PUMPS

- CHRYSLER WEDGE & HEMI -

ONE PIECE BILLET OIL PUMP COVER
- WEDGE and HEMI

REMOTE BILLET OIL PUMP COVER
- WEDGE and HEMI

One piece billet design of filter and pump cover.

More compact than earlier gray Milodon covers in height, width and length.

CNC machined from aircraft 6061-T6 aluminum

Cad/Cam engineered for maximum effeciency

Black hard anodized for long term durability. Available for:

-Hemi mount, Rear 12AN Port 21205 Buy Milodon Performance Water Pumps
-Hemi mount, Rear 16AN Port 21206 Buy Milodon Performance Water Pumps
-Wedge mount, Top 12AN Port . 21215 Buy Milodon Performance Water Pumps

 

Allows for remote filter use with (2) 10 AN ports.

More compact than earlier gray Milodon covers in height, width and length.

CNC machined from aircraft 6061-T6 aluminum

Cad/Cam engineered for maximum effeciency

Black hard anodized for long term durability. Available for:

-Hemi mount, Rear 12AN Port 21225 Buy Milodon Performance Water Pumps
-Hemi mount, Rear 16AN Port 21226 Buy Milodon Performance Water Pumps
-Wedge mount, Top 12AN Port . 21235 Buy Milodon Performance Water Pumps