Racing and Street Valves From Milodon

STREET STAINLESS VALVES

Street Stainless Valves feature :

  • Quality ONE piece forged valves 

  • Premium 21-4N stainless material on the exhaust valves and intake valves are made of an excellent quality HNV8 stainless steel.

  • Smooth machines heads increase flow and hard chromed stems reduce stem wear. 

  • Milodon Valves feature a large seat margin which allows more than one regrind.

  • Single keeper grooves to give greater valve tip strength.

  • Price level perfect for the everyday rebuild. 

 Sold in master packs of eight as "-8" and singles under the "-1" number.

Street Stainless Valves

SMALL BLOCK CHEVY PART# FORD PART#
1.94" Intake 45600-8  45600-1  302, 1.94" Intake 45660-8  45660-1 
2.02" Intake 45605-8  45605-1  302, 1.60" Exhaust 45665-8  45665-1 
1.50" Exhaust 45610-8  45610-1  351W, 1.84" Intake 45662-8  45662-1 
1.60" Exhaust 45615-8  45615-1  351W, 1.54" Exhaust 45667-8  45667-1 
BIG BLOCK CHEVY PART# 351C, 2.19" Intake 45670-8  45670-1 
2.065" Intake 45620-8  45620-1  351C, 1.71" Exhaust 45675-8  45675-1 
2.19 Intake 45625-8  45625-1  429/460 (1970-72 SCJ), 2.245" Intake 45680-8  45680-1 
1.725" Exhaust 45630-8  45630-1  429/460 (1968-72), 2.19" Intake 45681-8  45681-1 
1.88" Exhaust 45635-8  45635-1  429/460 (1968-72) 1.725" Exhaust 45685-8  45685-1 
SMALL BLOCK CHRYSLER PART# OLDS PART#
2.02" Intake 45640-8  45640-1  2.07" Intake 45690-8  45690-1 
1.60" Exhaust 45645-8  45645-1  1.71" Exhaust 45695-8  45695-1 
BIG BLOCK CHRYSLER PART# AUSTRALIAN HOLDEN PART#
2.08" Intake 45650-8  45650-1  253-308, 1.94" Intake 45760-8  45760-1 
2.14" Intake 45651-8  45651-1  253-308, 1.60" Exhaust 45765-8  45765-1 
1.74" Exhaust 45655-8  45655-1 
1.81" Exhaust 45656-8  45656-1 
 
NOTES:
1 = For use with non-rail, adjustable rockers ONLY.
2 = For use with non-adjustable, rail rockers ONLY.

- GUIDE PLATES and VALVE LOCKS -

PUSHROD GUIDE PLATES
Pushrod guide plates reduce the unwanted sideways motion of the pushrod under load.  This keeps the rocker arm stabilized, making the valve operation much smoother and more efficient.  Milodon guide plates hold the pushrods in the precise and correct alignment for proper valve-train operation without breakage at high loads and high RPM.  They are made from heat-treated chrome moly steel to reduce wear and are a must for any engine.

Pushrod Guide Plates
#10750

SB Chevy, stepped 5/16" 10750 
SB Chevy, flat 5/16" 10751 

Valve Adjustment Locks
 

4130 CHROME MOLY VALVE LOCKS
These locks are a must to keep valve settings correct for any period of time. Locks are made from 4130 material and are then heat-treated. This results in a part of great strength that will not split like some other more cheaply made locks. Available for 3/8" or 7/16" rocker arm studs.
3/8" rocker stud

10770 

7/16" rocker stud

10771