Milodon Chrome Valve Covers

CHROME VALVE COVERS
With their clean, distinctive styling Milodon chrome valve covers are not "just another valve cover". The Chevy valve covers, for instance, offer an exclusive design different from all the others. Besides the cosmetic differences, there are engineering improvements, too. Placement of the breather holes and breather baffles reduce oil drip from the breathers. The valve cover gasket flanges are wide, square and straight to allow proper gasket seating. All Milodon chrome valve covers are triple chrome plated and include breather grommets.

The tall style valve covers are intended to accommodate higher cam lift, bigger rocker arms and poly locks, etc. Because of the variety of these items available, it is difficult to guarantee that everything will fit, but in most cases there is ample room. Tall valve covers also make no accommodation for air conditioning, power brake boosters, etc. which is many crowded late model engine compartments may interfere. Stock height valve covers duplicate original dimensions and will clear factory engine accessories.


#85500 Small Block Chevy
#85600 Big Block Chevy

#85535 Small Block Chrysler
#85536 Big Block Chrysler

#85650 Small Block Ford
#85653 Big Block Ford
CHEVY
Small Block - 
3 1/2" Tall (Baffled)		 85500 
Small Block - 
2 1/4" Short (Baffled)		 85520 
Big Block - 
4 1/4" Tall  (No Baffles)		 85600 
FORD
289-302-351W - 
2 1/2" - 3 1/2" Tall (Baffled)		 85650 
351C-400 - 
2 1/2"-2 3/4" Tall (Baffled)		 85651 
390-427-428 - 
3 1/2" Tall (Baffled)		 85652 
429-460 - 
1 1/2" - 3 1/2" - 1 3/4" Tall (Baffled)		 85653 


#85300
CAPTIVE NUT VALVE COVER HOLD-DOWNS
These special valve cover hold-downs distribute pressure over a greater area than conventional methods, assuring a more complete seal. The clamp features a captive nut which is fastened to clamp and cannot fall off. This allows for quick and convenient installation. Hold-down studs are starter nosed, rolled threads, and black oxided. Fits stock or aftermarket stamped valve covers. Set consists of hold-down clamps and studs.
Small Block Chevy (Set of 8) 85300 
Big Block Chevy (Set of 14) 85320 
Replacement Studs for Milodon Hold-Downs (Set of 10) 85380 

#85680 #85682
Breathers
#85685, #85686
CHROME VALVE COVER BREATHERS
These highly polished and chrome plated breathers are the final touch to accent you valve covers or OEM replacements. All are supplied with necessary valve cover grommets.
Chrome for Standard 1.22" hole

85680 

Chrome for PCV hole

85681 

Chrysler Breather or Vac-U-Pan Chrome 1.22" hole

85682 

Chrome Shielded Slip-On (1-3/8 ID)

85685 

Chrome Open Slip-On (1-3/8 ID)

85686 

Chrome Open Slip-On (1-1/2 ID)

85687 

Not legal for sale or use in California on pollution controlled motor vehicles.


#85672, #85670, #85674
BREATHER GROMMETS AND PLUGS
Valve Cover Plug (1) for 1.22" hole

85670 

Grommets (2) for 1.22" hole

85672 

PCV Grommets (2) for 1.22" hole

85674 

CHRYSLER
273-340-360 - 
3" Tall (Baffled)		 85535 
383-440 - 
3 1/4" Tall (Baffled)		 85536 
OLDS
330-350-400-455 - 
2 3/4" Short (Baffled)		 85640 
PONTIAC
350-389-400-455 - 
3 1/2" Tall (Baffled)		 85645 


#85375
VALUE COVER STUDS
Permits rapid valve cover installation and removal. Guides valve cover and gasket into position. These studs are heat- treated and feature rolled threads and black oxided finish. Includes special serrated washer-faced nut. 
Small Block Chevy
1/4" x 1 1/4" (set of 8)

85375 

Big Block Chevy
1/4" x 1 1/4" ( set of 14)

85376 

Ford 302 - 351W
1/4" x 1 1/4" ( set of 12)

85378 

Ford 351C - 400M
1/4" x 1 1/4" ( set of 20)

85379 

Ford 390 - 427 - 428
5/16" x 1 1/4" ( set of 10)

85377 

Ford 429 - 460
1/4" x 1 1/4" ( set of 14)

85376 

Chrysler 318 - 340 - 360
1/4" x 1 1/4" ( set of 12)

85378 

Chrysler 383 - 400 - 440
1/4" x 1 1/4" ( set of 12)

85378 

Pontiac 326 - 455
5/16" x 1 1/4" ( set of 10)

85377 

Olds 330-455
1/4" x 1 1/4" ( set of 20)

85379 


#85305
VALVE COVER TABS
These valve cover tabs spread bolt load so as not to distort the valve cover causing annoying oil leaks. Packaged in complete sets and chrome plated.
Small Block Chevy 85305 
Big Block Chevy 85325 


#85700
VAC-U-PAN
Highly effective method of achieving optimum power through significantly reducing internal pressures. Breather of the unit attaches to valve cover and probe is inserted into header. Exhaust scavenging pulls pressure and blow- by out of motor. Complete kit including chrome breathers. Not for use with street mufflers.
Vac-U-Pan System

85700 

REPLACEMENT PARTS:
Vac-U-Pan Chrome Breather (1)

85682 

Vac-U-Pan Probe and Valve (1)

85684 


#85673
BAFFLED BREATHER GROMMET
This special valve cover breather grommet is foam-filled and will aid in preventing excessive oil blowing from the breather. Packaged in two per set and fits all non-baffled valve covers with standard 1.22" diameter hole.

85673