Oil System Components
- CHRYSLER OIL SYSTEM COMPONENTS -
![](../product-images/21525.png)
CHRYSLER CHROME MOLY OIL PUMP DRIVES
Distributor shaft and gear assembly for all 383-440 Wedge and Hemi engines. Bronze gear assemblies are for Roller Cams. Steel gear assemblies are used for flat tappet and hydraulic cam applications.
Wedge and Hemi using Milodon Oil Systems with ateel high volume oil pump and dual line spacer: #21001, #21150,
#21160. Overall length 8.562", 7" of shaft out the gear.#21525
Steel Gear |
21500 | ![]() |
Bronze Gear | 21520 | ![]() |
Wedge and Hemi using Milodon aluminum pump #21815. Use with Milodon Oil Systems #21175, #21185, #21190, #21195. Overall Length 8.187", 6 5/8" of shaft out the gear.
Steel Gear |
21503 | ![]() |
Bronze Gear | 21523 | ![]() |
Wedge and Hemi using stock-style pan and tube pick-up. Also used with Milodon Oil Systems #21000, #21010, #21100,
#21110 and systems using a Keith Black pump. Overall Length 7.875", 6 5/16" of shaft out the gear.
Steel Gear |
21505 | ![]() |
Bronze Gear | 21525 | ![]() |
![](../product-images/21535.png)
![](../product-images/21530.png)
CHRYSLER SMALL BLOCK
CHROME MOLY OIL PUMP DRIVES
Distributor shaft and gear assembly for all 340-360. Bronze gear assemblies are for Roller Cams. S teel gear assemblies are used for flat tappet and hydraulic cam applications. Both use premium material and will not wear like cheaper bronze version or stock stell cast gears.
Steel Gear |
21530 | ![]() |
Bronze Gear | 21535 | ![]() |
![](../product-images/21550.png)
CHRYSLER OIL PRESSURE REGULATOR
Permits oil pressure adjustment externally even when the engine is running. Very valuable asset for dialing-in desired oil pressure, for compensating for low oil pressure on street application or excessively high oil pressure on the track (more than 75 PSI hot is usually unecessary and uses extrahorsepower to drive).
Chrysler Wedge and 426 Hemi #21225 #21460 #21461 #21462 #21463 #21464 #21465 |
21550 | ![]() |
CHRYSLER OILING SYSTEM COMPONENTS
![]() |
![]() |
PUMP COVERS
PICKUPS
Single Line Static Pick-Up (less fittings) | 21300 | ![]() |
Dual Line Swivel Pick-Up (less fittings) | 21330 | ![]() |
Dual Line Spacer, See image in kit #21150 | 21350 | ![]() |
AMC Dual Line Spacer | 21355 | ![]() |
![]() |
![]() |
LINES
25 1/2" 12-AN Line |
21450 | ![]() |
18" 12-AN Line | 21455 | ![]() |
![](../product-images/27500.png)
HEMI SPARK PLUG TUBE SEALS
Required by serious competitors using Hemi engines. Milodon seals press fit into the cylinder heads and provide a snug, O- ringed contact on spark plug tubes preventing undesirable oil seepage into combustion chambers. Facilitates accurate plug readings.
Hemi - Late (set of eight) |
27500 | ![]() |
Hemi - Early (set of eight) | 27050 | ![]() |
![](../product-images/21590.png)
CHRYSLER OIL SYSTEM GASKET & O-RING KIT
Includes oil pump to block, pressure regulator assembly, old style oil filter adapter gasket, oil pump and pick-up O-rings for Milodon Oil Systems or any other Chrysler Hemi and Wedge oil pumps. Contains all components necessary
To rebuild complete Milodon oil systems |
21590 | ![]() |
O-rings & Gaskets only | 21591 | ![]() |
![](../product-images/21460.png)
FITTINGS
![]() |
![]() |
![]() |
PUMPS
Billet Pump Housing and Gears, 19 G.P.M. Flow |
21814 | ![]() |
Pump Housing and Gears, 19 G.P.M. Flow | 21815 | ![]() |
Replacement Gears for #21815 (1.100" tall) | 21817 | ![]() |