CHRYSLER OIL SYSTEMS
External oil systems allow the bypassing of irregular and restrictive stock internal oil passages. These systems allow the placement of the pick-up in optimum position, plus the use of free flowing braided line. Kits are available with static or swivel pick-ups with single or dual lines and with or without oil pumps.. Milodon Oiling Systems provide the optimum in oiling for all types of competition. Systems come complete with all necessary bolts, fittings, O-rings, etc. for installation. A Milodon oil pan, windage tray and oil pump drive shaft will complete the package. In some cases, minor notching of frame is required.
![](../product-images/21010.png)
SINGLE LINE STATIC
Ideal system for street or street and strip applications. Will supply adequate oil supply up to 7000 RPM when used with a Mellings M63HV high volume pump. Use with Milodon #30931 or #31015 oil pan.
426 Hemi or Wedge, with motor plate |
21000 | ![]() |
383-440 Wedge, with stock motor mounts | 21010 | ![]() |
- OIL PUMP DRIVE ASSEMBLY REQUIRED -
Use #21505 Steel Gear / #21525 Bronze Gear
![](../product-images/21002.png)
SINGLE LINE PUMP KITS
Ideal system for Pro Touring or Street and S trip applications where space is limited due to motor mounts. Will supply adequate oil volume for use to 7500 RPM with a Milodon #21814 or Mellings M63HV high volume pump. Longer oil pump drive shaft is needed. Works with either a tubular K-member or stock K-member and steering. Includes billet pump cover, bolts, fittings and 12AN line.
Hemi and Wedge with 30931 or 31015 oil pans |
21001 | ![]() |
- Use oil pump drive #21500 Steel Gear / #21520 Bronze Gear
Hemi and Wedge with 31581 oil pan |
21002 | ![]() |
- Use oil pump drive #21505 Steel Gear / #21525 Bronze Gear
DUAL LINE WITH PUMP
Systems with pumps deliver substantial oil even when engine RPM greatly exceeds 8000. Use with Milodon rear sump design oil pans.
With Swivel Pickup
426 Hemi or Wedge, with motor plate | 21175 | ![]() |
383-440 Wedge, with stock motor mounts | 21185 | ![]() |
- OIL PUMP DRIVE ASSEMBLY REQUIRED -
Use #21503 Steel Gear / #21523 Bronze Gear
TECH NOTE: On Oil Pump Covers, the Top port is "OUT",
while the Bottom port is "IN".
![](../product-images/21100.png)
SINGLE LINE SWIVEL
Ideal for cars and applications where engine speed does not exceed 7000 RPM when used with a Mellings M63HV high volume pump. Use with Milodon rear sump design oil pans.
426 Hemi or Wedge, with motor plate |
21100 | ![]() |
383-440 Wedge, with stock motor mounts | 21110 | ![]() |
- OIL PUMP DRIVE ASSEMBLY REQUIRED -
Use #21505 Steel Gear / #21525 Bronze Gear
![](../product-images/21160.png)
DUAL LINE SWIVEL
Dual line systems deliver adequate oil volume up to 7500
RPM when used with a Mellings M63HV high volume pump. Use with Milodon rear sump design oil pans.
With Swivel Pickup
426 Hemi or Wedge, with motor plate |
21150 | ![]() |
383-440 Wedge, with stock motor mounts | 21160 | ![]() |
OIL PUMP DRIVE ASSEMBLY REQUIRED -
Use #21500 Steel Gear / #21520 Bronze Gear
![](../product-images/21190.png)
DUAL LINE WITH OIL PUMP
FOR REMOTE OIL FILTER
Same as #21175 and 21185 but has provision for remote filter. Use with Milodon rear sump design oil pans.
With Swivel Pickup
426 Hemi or Wedge, with motor plate |
21190 | ![]() |
383-440 Wedge, with stock motor mounts | 21195 | ![]() |
Marine Use with V-Drive Pan
Hemi & Wedge, Swivel Pickup with Oil Pump |
21193 | ![]() |
- OIL PUMP DRIVE ASSEMBLY REQUIRED -
Use #21503 Steel Gear / #21523 Bronze Gear