Oil System Components

CHRYSLER CHROME MOLY OIL PUMP DRIVES

Distributor shaft and gear assembly for all 383-440 Wedge and Hemi engines. Bronze gear assemblies are for Roller Cams. Steel gear assemblies are used for flat tappet and hydraulic cam applications.
Wedge and Hemi using Milodon Oil Systems with ateel high volume oil pump and dual line spacer: #21001, #21150,
#21160. Overall length 8.562", 7" of shaft out the gear.#21525

Steel Gear	21500
Bronze Gear	21520

Wedge and Hemi using Milodon aluminum pump #21815. Use with Milodon Oil Systems #21175, #21185, #21190, #21195. Overall Length 8.187", 6 5/8" of shaft out the gear.

Steel Gear	21503
Bronze Gear	21523

Wedge and Hemi using stock-style pan and tube pick-up. Also used with Milodon Oil Systems #21000, #21010, #21100,
#21110 and systems using a Keith Black pump. Overall Length 7.875", 6 5/16" of shaft out the gear.

Steel Gear	21505
Bronze Gear	21525

 

CHRYSLER SMALL BLOCK
CHROME MOLY OIL PUMP DRIVES

Distributor shaft and gear assembly for all 340-360. Bronze gear assemblies are for Roller Cams. S teel gear assemblies are used for flat tappet and hydraulic cam applications. Both use premium material and will not wear like cheaper bronze version or stock stell cast gears.

Steel Gear	21530
Bronze Gear	21535

CHRYSLER OIL PRESSURE REGULATOR

Permits oil pressure adjustment externally even when the engine is running. Very valuable asset for dialing-in desired oil pressure, for compensating for low oil pressure on street application or excessively high oil pressure on the track (more than 75 PSI hot is usually unecessary and uses extrahorsepower to drive).

Chrysler Wedge and 426 Hemi #21225 #21460 #21461 #21462 #21463 #21464 #21465	21550

CHRYSLER OILING SYSTEM COMPONENTS

PUMP COVERS

Hemi & Wedge with Motor Plate, Billet, Rear 12AN Port	21205
Hemi & Wedge with Motor Plate, Billet, Rear 16AN Port	21206
Wedge with Stock Mounts, Billet, Top 12AN Port	21215
Hemi & Wedge with Motor Plate, Billet, Rear 12AN Port and (2) 10AN Remote Filter Ports	21225
Hemi & Wedge with Motor Plate, Billet, Rear 16AN Port and (2) 10AN Remote Filter Ports	21226
Wedge with Stock Mounts, Billet, Top 12AN Portand (2) 10AN Remote Filter Ports	21235

PICKUPS

Single Line Static Pick-Up (less fittings)	21300
Dual Line Swivel Pick-Up (less fittings)	21330
Dual Line Spacer, See image in kit #21150	21350
AMC Dual Line Spacer	21355

LINES

25 1/2" 12-AN Line	21450
18" 12-AN Line	21455

HEMI SPARK PLUG TUBE SEALS

Required by serious competitors using Hemi engines. Milodon seals press fit into the cylinder heads and provide a snug, O- ringed contact on spark plug tubes preventing undesirable oil seepage into combustion chambers. Facilitates accurate plug readings.

Hemi - Late (set of eight)	27500
Hemi - Early (set of eight)	27050

CHRYSLER OIL SYSTEM GASKET & O-RING KIT

Includes oil pump to block, pressure regulator assembly, old style oil filter adapter gasket, oil pump and pick-up O-rings for Milodon Oil Systems or any other Chrysler Hemi and Wedge oil pumps. Contains all components necessary

To rebuild complete Milodon oil systems	21590
O-rings & Gaskets only	21591

FITTINGS

12-AN 90° Fitting	21460
12-AN 45° Fitting	21461
12-AN Union	21462
12-AN Jam Nuts & O-rings (2)	21463
12-AN Large Diameter Washers & O-rings (2)	21464
12-AN Plug & O-ring (For pump cover or drain plug)	21465

12-AN 45° Fitting, Jam Nut & O-ring (For pump cover)	21466
12-AN 90° Fitting, Jam Nut & O-ring (For pump cover)	21467
12-AN 90° Fitting, Washer, Jam Nut & O-ring (For oil pan)	21468
12-AN Plug, Washer & O-ring (For Oil Pan)	21469

PUMPS

Billet Pump Housing and Gears, 19 G.P.M. Flow	21814
Pump Housing and Gears, 19 G.P.M. Flow	21815
Replacement Gears for #21815 (1.100" tall)	21817