Chevy LS Oil Pans

- Street & Strip -

LOW PROFILE - HEAVY DUTY USE
LS1, LS2, LS3, LS6 & LS7

Allows installation of LS Chevy engines into Camaro, Chevelle, 55-57 Chevy and 68 & up Nova chassis.

This pan uses heavy duty steel and double thick pan rails yet it is actually 5 1/2 pounds lighter than the factory aluminum pan. Increased oil capacity and oil control allows for consistant oil pressure under heavy usage and more available power.

Uses billet filter block that either mounts the filter on the pan rail or provides AN fittings that route to a remote filter housing. The on the block housing keeps the oil filter "above" the bottom of oil pan for protection. You can use the long LS filter OR the 1970's GM filter that increases filtering by 40%.

Pan Capacity is 7 Qts. Plus Filter
Sump: 9" Long, 11" Wide, 6" Deep - Front: 1 3/4" deep
All chassis (except 62-67 Nova & 55-57 Chevy) 30915
55-57 Chevy 30916

Oil Pump and Pick-Up Required:

Pickup 18290
On the Block Filter Boss 21580
Remote Filter Boss 21576
Remote Filter Kit 21575
Windage Tray 32150
Oil Pan Gasket 41012
Pan Bolts 85002
Dipstick 22006
oil pan 30915
Allows 4.060" Stroke crank
NOTE: Front Fitting Is Pressure Out, Rear Fitting Is Return In
** Milodon Dipstick requires use of tube headers & will not fit with stock cast manifolds

LS1, LS2, LS3, LS6 & LS7

Allows installation of LS Chevy series engines into Camaro, Chevelle, 55-57 Chevy and 68 & up Nova. Uses 10AN oil filter attaching tubes welded to the pan rail. If oil pressure over 80 pounds is comon then the 30915 pan should be used with the heavy duty billet filling plate which will accomodate oil pressure up to 95 pounds.

Pan Capacity is 7 Qts. Plus Filter - 6" Deep Sump
LS Chevy Series, All 30914

Oil Pump and Pick-Up Required:

Pickup 18290
Remote Oil Filter Kit 21575
Dipstick 22006
Windage Tray 32150
oil pan 30914

- Pro Touring / Road Race -

PRO TOURING and DRIFT

For high output LS engines where stock style cast aluminum pans are inadequate. A road race capable pan with additional 2 quart capacity and a competition trap door system proven to provide good oil supply on hard right and left hand turns. Fits most all GM chassis including Corvette.

Uses billet filter block that either mounts the filter on the pan rail or provides AN fittings that route to a remote filter housing. The on the block housing keeps the oil filter "above" the bottom of oil pan for protection. You can use the long LS filter OR the 1970's GM filter that increases filtering by 40%.

Pan Capacity is 6 Qts. Plus Filter
Sump 9" Long, 12" Wide, 5 1/2" Deep
LS1, LS2, LS3, LS6, LS7 31507

Oil Pump and Pick-Up Required:

Pickup 18292
On Block Filter Boss 21580
Remote Filter Boss 21576
Remote Filter Kit 21575
Windage Tray 32150
Oil Pan Gasket 41012
Pan Bolts 85002
Dipstick 22006
oil pan 31507
Allows 4.060" Stroke crank
NOTE: Pictured with optional #21580 filter block
NOTE: Front Fitting Is Pressure Out, Rear Fitting Is Return In
  • The shallowest LS pan on the market
  • Carries 2 extra quart over "cast" pan
  • Contains baffles and trap doors for oil control unlike empty "cast" pans

LS TURBO, TUBE CHASSIS

  • Dual Turbo rerturns
  • Trap doored with advanced tray & scrapper
  • Fit all larger strokes
  • Will accept filter on the block or remote
  • For cars that are open under the engine
5 1/2" deep rear, 4 1/2" deep front
8 quart pan capacity
Internal Pickup 31410
External 16AN pickup 31415

Oil Pump and Pick-Up Required:

Pickup 18292
On Block Filter Boss 21580
Remote Filter Boss 21576
Remote Filter Kit 21575
Windage Tray 32150
Oil Pan Gasket 41012
Pan Bolts 85002
oil pan 31507
 

- Engine Swap -

62-67 CHEVY II NOVA

Allows swapping LS Chevy engine into an early Nova. Will not work with stock power steering. Full length Milodon tray upgrade mounts on the stock factory tray bolts and will increase power. #21575 Remote filter kit is needed.

Pan Capacity is 6 Qts. Plus Filter
Sump: 8½" Long, 8¼" Wide, 7½" Deep
LS Chevy Series, All 31063

Oil Pump and Pick-Up Required:

LS series, stock oil pump. 18291
Remote Oil Filter Kit 21575
Windage Tray 32150
Pan Bolts 85002
Dipstick 22006
oil pan 31063
Allows 4.060" Stroke crank

S-10 BLAZER & PICKUP

The S-10 pan allows the LS Chevy installation the Blazer and pickup. Windage tray can be used to increase oil control and power. Full length Milodon tray upgrade mounts on the stock factory tray bolts. #21575 Remote filter kit is needed.

Pan Capacity is 5 Qts. Plus Filter
Sump: 7" Long, 8¼" Wide, 7½" Deep
LS Chevy Series, All 31083

Oil Pump and Pick-Up Required:

LS series, stock oil pump. 18291
Remote Oil Filter Kit 21575
Windage Tray 32150
Pan Bolts 85002
Dipstick 22006
oil pan 31083
Allows 4.060" Stroke crank