Chevy LS Oil Pans

Allows installation of LS Chevy engines into Camaro, Chevelle, 55-57 Chevy and 68 & up Nova chassis.

This pan uses heavy duty steel and double thick pan rails yet it is actually 5 1/2 pounds lighter than the factory aluminum pan. Increased oil capacity and oil control allows for consistant oil pressure under heavy usage and more available power.

Uses billet filter block that either mounts the filter on the pan rail or provides AN fittings that route to a remote filter housing. The on the block housing keeps the oil filter "above" the bottom of oil pan for protection. You can use the long LS filter OR the 1970's GM filter that increases filtering by 40%.

Allows installation of LS Chevy series engines into Camaro, Chevelle, 55-57 Chevy and 68 & up Nova. Uses 10AN oil filter attaching tubes welded to the pan rail. If oil pressure over 80 pounds is comon then the 30915 pan should be used with the heavy duty billet filling plate which will accomodate oil pressure up to 95 pounds.

For high output LS engines where stock style cast aluminum pans are inadequate. A road race capable pan with additional 2 quart capacity and a competition trap door system proven to provide good oil supply on hard right and left hand turns. Fits most all GM chassis including Corvette.

Uses billet filter block that either mounts the filter on the pan rail or provides AN fittings that route to a remote filter housing. The on the block housing keeps the oil filter "above" the bottom of oil pan for protection. You can use the long LS filter OR the 1970's GM filter that increases filtering by 40%.

• Dual Turbo rerturns
• Trap doored with advanced tray & scrapper
• Fit all larger strokes
• Will accept filter on the block or remote
• For cars that are open under the engine

Allows swapping LS Chevy engine into an early Nova. Will not work with stock power steering. Full length Milodon tray upgrade mounts on the stock factory tray bolts and will increase power. #21575 Remote filter kit is needed.

The S-10 pan allows the LS Chevy installation the Blazer and pickup. Windage tray can be used to increase oil control and power. Full length Milodon tray upgrade mounts on the stock factory tray bolts. #21575 Remote filter kit is needed.