ENGINE BOLT KITS

All the fasteners you need to build a high end performance engine, in one convenient box.

• Carb and valve cover studs have thread starter noses for easy assembly. • Intake and header bolts use a reduced size 3/8" head to allow greater access when tightening. • Timing cover and pan bolts have serrated washer faces to resist loosening even with initial startup gasket shrinkage. • Water pump botls for Chevys include both long and short sets. Water pump and timing cover bolts for the 302 Ford include all 19 pieces required. • Balncer bolts are Grade 8 and include a heavy duty load washer and locking washer.

Engine Bolt Kits Without Head Bolts

Small Block Chevy set	83001
Big Block Chevy set	83006
Ford 302 set	83011
Chrysler 383, 400, 440 set	83016

Required to properly mount the tray assembly. Same 190,000 tensile strength as all orther Milodon studs. Adjustable tray mounting position allows the tray to work at its maximum potential by being as close as possible to the rotating assembly (min.100") and to avoid any unnecessary interference with the oil pan. Install with the 7/16" nuts torqued to 65 ft./lbs.or 1/2" to
85 ft/lbs using oil, and the 3/8" nuts torqued to 35 ft./lbs.

Small Block Chevy set 81150 SB Chevy 7/16" Windage Tray Stud (1pc.) 81148 Big Block Chevy set 81151 BB Chevy 1/2" Windage Tray Stud (1pc.) 81152 Ford 302 set 81157 Ford 351-W set 81167 Ford 351-C set 81151 Ford 429 & 460 set 81190 Small Block Chrysler - 318 set 81182 Small Block Chrysler - 340 & 360 set 81151 Olds 400-425-455 set 81219 Pontiac set 81151 Holden 253-308 set 81157

 Prop 65 Warning

Warning - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Milodon - 2250 Agate Court, Simi Valley, California 93065     (805) 577-5950     7:00-4:30 Pacific