Oil System Components

- CHEVY OIL SYSTEM COMPONENTS -

#23000

OIL PUMP PRIMERS

Before starting a new motor, proper priming of the system is absolutely critical. These oil pump primers prohibit needless engine wear from improper lubrication upon initial start-up. These primers allow you to drive the oil pump with a 3/8" drill once the distributor is removed. The Chevy "Pro Model" not only primes the oil pump and bottom end but also the lifters and rocker assemblies. The "Pro Model" also has a top support that locks down with the distributor clamp to provide "hands free" operation. All are black oxide finished.

Small and Big Block Chevy

23000 Buy Milodon Performance Water Pumps
Ford 289, 302, 390, 428 with 1/4" Hex Pump Shaft 23005 Buy Milodon Performance Water Pumps
Ford 351W, 351C, 400, 429, 460 with 5/16" Hex Pump Shaft 23010 Buy Milodon Performance Water Pumps
Small and Big Block Chryslers 23015 Buy Milodon Performance Water Pumps
#21560

BRAIDED STEEL REMOTE FILTER KIT

This kit allows you to overcome space limitations by permitting custom installation of the oil filter in any desired location. Designed for Competition or Street Rods that require the durability & look of Braided Steel AN lines & fittings. This kit comes with remote filter housing, which uses a Ford/Chrysler type filter, as well as (2) 24" 10AN oil lines & fittings.

NOTE: Requires Block Adapter #21565 for Chevys, #21566 for Ford /Chrys. engines or a Milodon oiling system.

Kit for Single Filter

21560 Buy Milodon Performance Water Pumps
Kit for Dual Filter 21562 Buy Milodon Performance Water Pumps
#21565

REMOTE FILTER BLOCK ADAPTERS

Chevy V8 Adapter for Remote Filter Kits (Single or Dual)

21565 Buy Milodon Performance Water Pumps
Ford / Chrysler V8 Adapter for Remote Filter Kits (Single or Dual) 21566 Buy Milodon Performance Water Pumps

#23105

OIL FLOW RESTRICTOR PLUGS

These plugs solve the common high-performance engine problem of too much oil in the head area. The plug restricts approximately 75% of the oil to the top end of the engine for better lubrication and prevents oil wastage at the lifters (which will cause windage problems). This also keeps the sump better supplied with oil. Installs easily into the back of the block in place of the stock plugs. Not for use with hydraulic lifters.

ALUMINUM HEX HEAD

Small Block and Big Block Chevy

23100 Buy Milodon Performance Water Pumps

STAINLESS STEEL FLUSH

Plug has an allen head to allow flush mounting in the block and is made from stainless steel to avoid stripping out on removal.
Small & Big Block Chevy, late model Bowtie, Rocket & Merlin

23105 Buy Milodon Performance Water Pumps
#23110

LIFTER VALLEY PRESSURE VENTS

These vents are a key part of any highly efficient oiling system. They allow the crankcase pressure to escape unobstructed, allowing more speedy oil drain back to the oil pan and stop a large portion of the unwanted oil drain back over the cam area that causes excessive windage and power loss. Existing holes in the block are simply tapped and vents screw in.

Small Block Chevy

23110 Buy Milodon Performance Water Pumps
#23150

LIFTER VALLEY SCREEN KITS

The Milodon Lifter Valley Screen Kits provides inexpensive insurance for Small Block and Big Block Chevy racing engines-especially for dry sump applications. Designed to prevent broken parts from falling into the oil pan or pump and causing serious motor damage, these stainless steel screens affix to the oil drainback holes located in the valley area of Chevy engines. Screen kit includes instructions and epoxy.

Small Block Chevy

23150 Buy Milodon Performance Water Pumps

Kit includes both screens & block-off plugs for over the cam area to give you an option.

Big Block Chevy

23160 Buy Milodon Performance Water Pumps

Kit includes large epoxy tube for more than adequate coverage.