COMPLETE ENGINE BOLT KITS 

• Race quality 170,000 PSI head bolts included. These head bolts have reduced head size 1/2" hex to allow easy head bolt re-torquing without excessive valve-train interference.

• Carb and Valve cover studs have thread starter nose to allow easy assembly.

• Intake and header bolts use a reduced size 3/8" head to allow greater access when tightening.

• Timing cover and pan bolts have serrated washer faces to resist loosening even with initial engine startup gasket shrinkage.

• Water pump bolts for Chevys include both long and short water pump bolt sets. Water pump and timing cover bolts for the Ford 302 include all 19 bolts required.

• Balancer bolts are Grade 8 and include a heavy duty washer and locking washer. 

- ENGINE BOLT KITS -

83000 

83005 

83010 

83015 

Required to properly mount the tray assembly. Adjustable mounting position allows the tray to work at its maximum potential by being as close as possible to the rotating assembly (min.100") and to avoid any unnecessary interference with the oil pan. Install with the 7/16" nuts torqued to 65 ft./lbs or 1/2" to 85 ft/lbs using oil, and the 3/8" nuts torqued to 35 ft./lbs.